Siloen SR 349 highly effective solvent-free highly effective impregnation material water based potassium methyl silicone
It is added.
Outer surface impregnation
Brick and tile impregnation
Concrete impregnation
Solids ………………………………54 – 55 %
K2O counterpart, mean……………………..23 – 25 %
View……………….…..….yellowish fuzzy liquid
Specific gravity, 25 o C ……………………………1,4
Water dissolution …………….…………Fully soluble
Siloen SR 349 is a very effective and excellent impregnation and shrinkage
It provides. It shows the effect of carbon dioxide in the air with all kinds of humid and rainy weather conditions for 24 hours and
Protects the material.
Siloen SR 349 is fully mixed with water. It can be applied by dipping, spraying or brushing. Pre-construction construction
The surface of the material should be slightly moistened.
The most common water thinning ratio: 1 part Siloen SR 349 with 50-120 parts (best ratio 65 parts) water. Solids
it should be better than 3%. After application the applied surface or material to dry for 24 hours
Releasing is recommended for maximum water repellency. In case of urgent conditions, not exceeding 175 o C, this period in heat
It can be shortened.
If white spots occur as a result of precipitation of inorganic substances such as calcium carbonate, wash and wipe
may need to be rubbed if necessary.
Packing :280kg drums and 1400kg IBC.
Siloen SR B55 is a micro-emulsion of highly effective water-based modified alkali silanes with no solvent. Waterproofing is a long-acting mixture used for impregnation purposes.
External surface impregnation
Concrete impregnation
Manufacture of bricks and tiles in all kinds of natural impregnation
Amount of active substance, ±2 ………..… ….… 52 %
pH ……………..…………………..…..….13 – 14
Density, g/cm3, 25oC…………… ………..1,4
K20 counterpart, approx. % ….…….………20 – 22
Solvent …………………….…….…..……….. water
Siloen SR B55 provides very effective and excellent impregnation and protection in the construction materials used in exterior surfaces. It shows the effect of moisture and carbon dioxide in the air in all kinds of humid and rainy weather conditions for 24 hours and protects the material. It is ideal for visual presentation because it gives a visible drop effect.
Since Siloen SR B55 is a concentrated material, it should not be used exactly as it is in its package and should be diluted with water first. The hardness of the water used must be less than 20o DH, otherwise it may cause crashes. The materials to be impregnated can also be applied by dipping, spraying or brushing into this dilute Siloen SR B55 solution.
Siloen SR B55 is fully mixed with water.
It can be applied by dipping, spraying or brushing.
Thinning rates with water (recommended according to laboratory test results):
In clay-based baked construction materials such as tiles, bricks: 1 part Siloen SR B55 with 50-120 parts (best ratio 65 parts) water. It is good if the solids content is not more than 3%.
For construction materials such as natural stone, decorative stone and cultural stone: 1 part Siloen SR B55 and 10-30 part water.
On concrete, plaster: 1 part Siloen SR B55 and 10-30 parts water.
After application the surface or material left to dry for 24 hours is recommended for maximum water repellency. In case of haste, this period may be shortened, not exceeding 175 oC. If you have white spots as a result of collapsing of inorganic substances such as calcium carbonate, it may be necessary to wash, wipe and rub if necessary.
Packing : 270kg PE drums.